{"product_id":"turbo-kit-for-chevrolet-corvette-c7-2014-2019-6-2l","title":"Turbo Kit for Chevrolet Corvette C7 (2014-2019) 6.2L","description":"\u003cp\u003e\u003cstrong\u003eComplete single-turbo intercooled package for the Chevrolet Corvette C7 (2014–2019) with the 6.2L V8.\u003c\/strong\u003e It pairs stainless manifolds, crossover, T4 pedestal and downpipe with an S400\/S475 T4 turbo, 60 mm external wastegate and a massive front-mount intercooler. This is a high-capacity street\/track hot-side and cooling package — not a turnkey fuel-and-electronics kit. Expect serious supporting mods, fueling and a tune. The 1100 hp figure is a hardware ceiling with a built engine and supporting mods, not a dyno result for a stock C7. Engine code references: LT1 \/ LT4 where applicable.\u003c\/p\u003e\n\u003ch3\u003eWhy this kit\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eS400\/S475 T4 turbo with 75 mm compressor wheel and Inconel turbine\u003c\/li\u003e\n\u003cli\u003eStainless manifolds, crossover with flex, T4 pedestal and 4\" downpipe\u003c\/li\u003e\n\u003cli\u003e60 mm external wastegate with dump tube and multi-spring kit\u003c\/li\u003e\n\u003cli\u003eMassive tube-and-bar intercooler, 3.00\" inlet \/ 3.50\" outlet, 6\" core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003ePackage Includes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e(1) S400\/S475 T4 turbocharger — compressor wheel 75\/100 mm, turbine 83×74 mm Inconel 713, 5\" compressor inlet, V-band compressor outlet, T4 divided turbine housing 1.10 A\/R, 4\" V-band turbine outlet, 1\/4\" NPT oil feed, standard 2-bolt oil drain\u003c\/li\u003e\n\u003cli\u003e(1) Stainless manifolds \/ crossover \/ T4 pedestal \/ downpipe set — V-band clamps, 3\" crossover with flex, 2-piece 4\" downpipe\u003c\/li\u003e\n\u003cli\u003e(1) 60 mm external wastegate kit with stainless dump tube, 10 psi and 18 psi springs (combinable to ~28 psi)\u003c\/li\u003e\n\u003cli\u003e(1) Massive front-mount intercooler — tube\/bar design, 3.00\" inlet, 3.50\" outlet, 6.00\" wide core\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eTurbocharger Specs\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eType: S400\/S475, T4 divided 1.10 A\/R turbine housing\u003c\/li\u003e\n\u003cli\u003eCompressor: 75 mm cast wheel, 5\" inlet, V-band outlet\u003c\/li\u003e\n\u003cli\u003eTurbine: 83×74 mm Inconel, 4\" V-band outlet\u003c\/li\u003e\n\u003cli\u003eOil: 1\/4\" NPT feed, standard 2-bolt drain flange\u003c\/li\u003e\n\u003cli\u003eHardware ceiling about 1100 hp with a built engine, fueling and supporting mods — not a stock-car dyno result\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eExact Fitment — Chevrolet Corvette C7\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003e2014–2019 Chevrolet Corvette C7 with 6.2L V8\u003c\/li\u003e\n\u003cli\u003eNot for C5 \/ C6 — those have their own listings\u003c\/li\u003e\n\u003cli\u003eCharge piping, fueling, ECU tune, clutch and supporting mods are not included\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eNot Included\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eIntercooler piping \/ charge pipes beyond the intercooler core\u003c\/li\u003e\n\u003cli\u003eOil feed\/drain lines, blow-off valve, boost controller, injectors, fuel pump and ECU tune (required)\u003c\/li\u003e\n\u003cli\u003eClutch upgrade, boost gauge and wideband\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eInstallation Notes\u003c\/h3\u003e\n\u003cul\u003e\n\u003cli\u003eProfessional installation required. This is a large single-turbo package for a built or heavily supported C7\u003c\/li\u003e\n\u003cli\u003eOil return must drain by gravity; prime the turbo with oil before first start and check for leaks\u003c\/li\u003e\n\u003cli\u003ePlan fueling, tuning and driveline upgrades before chasing high boost\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003ch3\u003eFAQs\u003c\/h3\u003e\n\u003cp\u003e\u003cstrong\u003eDoes this fit a C5 or C6?\u003c\/strong\u003e No. This listing is C7 2014–2019 only.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eHow much power will it make?\u003c\/strong\u003e On a stock C7 this is not a mild street kit — supporting mods are mandatory. 1100 hp is the hardware ceiling with a built engine and full supporting mods.\u003c\/p\u003e\n\u003cp\u003e\u003cstrong\u003eIs it plug-and-play?\u003c\/strong\u003e No. You still need charge piping, oil lines, fueling, an ECU tune and substantial supporting work.\u003c\/p\u003e\n","brand":"VelocityMax","offers":[{"title":"Default Title","offer_id":67983773008120,"sku":"DS-EP2VE5RAS","price":7155.95,"currency_code":"USD","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0800\/1290\/2648\/files\/turbo-kit-corvette-c7-2014-2019-main.jpg?v=1793948660","url":"https:\/\/performancechiptuning.com\/de\/products\/turbo-kit-for-chevrolet-corvette-c7-2014-2019-6-2l","provider":"Performance Chip Tuning","version":"1.0","type":"link"}