Cold Air Intake Kit for Chevrolet Silverado 2500HD/3500 (2004) with 6.6L V8 Diesel LB7 Engine

Cold Air Intake System w/Heat Shield

*Make note that not all 2004 model year vehicles are equipped with the LB7 engine type.

This Intake Kit will only fit 2004 model year vehicles with LB7 engine types. 2004 model year vehicles

with the LB7 engine type can be identified by VIN number. The 8th number of the VIN will be

“1” on 2004 model year vehicles with the LB7 engine type.

Features

• Boost horsepower and torque by up to 10%
• Made with T304 lightweight aluminum piping
• Engineered for exceptional filtration and high airflow
• Improves throttle response for a more efficient drive
• Replaces factory air filter and intake tube
• Maximizes airflow through stock manifold system for a deep, sporty sound
• Washable filter requires cleaning only every 50,000 miles under normal driving conditions
• Easy installation with basic hand tools, takes less than 60 minutes
• Will not void vehicle warranty

 Rev up the power in your Chevrolet Silverado 2500HD/3500 (2004) with our Cold Air Intake Kit. With its advanced engineering, our kit will provide you with exceptional filtration and increased horsepower and torque that you can feel. Our kit has been expertly designed to optimize the airflow into your vehicle, so you can take full advantage of its LB7 engine. What’s more, you can feel secure in your investment because our kit will not void your vehicle warranty. Get rid of your old, restrictive air box and experience the difference in performance with our Cold Air Intake Kit.

Why change your factory air box for an intake?

- Gain more Horsepower
- Better Acceleration
- Improved Fuel Economy
- Enhanced Sound - A deeper or throaty tone
- Sporty Engine Look
- Spend Less on Filters - Can be cleaned and re-oiled
Installation is fairly easy and only involves removal of your factory air box.
Basic tools are required including screw drivers and socket wrenches to remove the factory air box. You can also search on YouTube for videos showing air box removal for your vehicle.
Most customers can install an aftermarket air intake within 1 hour
It is advised to RESET your battery terminal for a few seconds so your engine computer can re-learn the increase in air flow. Always disconnect your battery when performing engine work.