Cold Air Intake For Acura MDX (2007-2013) with 3.5L V6 Engine Black

Air Intake System Kit Black Coated

Fitment:

2007-2013 Acura MDX 3.7L V6 Engine

(Fits Auto & Manual Transmission)

Features

• Boost horsepower and torque by up to 10%
• Made with T304 lightweight aluminum piping
• Engineered for exceptional filtration and high airflow
• Improves throttle response for a more efficient drive
• Replaces factory air filter and intake tube
• Maximizes airflow through stock manifold system for a deep, sporty sound
• Washable filter requires cleaning only every 50,000 miles under normal driving conditions
• Easy installation with basic hand tools, takes less than 60 minutes
• Will not void vehicle warranty

**product is not CARB legal, certificate not included. Off road use only. Professional installation is highly recommended and we are not responsible for any mechanical failure if installed incorrectly**

The Acura MDX 2007-2013 engine can benefit from a cold air intake upgrade. The additional airflow provided by the cold air intake system increases power and throttle response while optimizing engine performance. Cold air intakes replace the stock intake system, bringing in more cold air and preventing hot engine bay air from entering the intake system. The result is improved power, torque, and improved fuel efficiency. Installing a cold air intake can reduce engine noise as well. Overall, upgrading the engine with a cold air intake is an easy and cost effective way to improve the performance of your MDX engine.

Why change your factory air box for an intake?

- Gain more Horsepower
- Better Acceleration
- Improved Fuel Economy
- Enhanced Sound - A deeper or throaty tone
- Sporty Engine Look
- Spend Less on Filters - Can be cleaned and re-oiled
Installation is fairly easy and only involves removal of your factory air box.
Basic tools are required including screw drivers and socket wrenches to remove the factory air box. You can also search on YouTube for videos showing air box removal for your vehicle.
Most customers can install an aftermarket air intake within 1 hour
It is advised to RESET your battery terminal for a few seconds so your engine computer can re-learn the increase in air flow. Always disconnect your battery when performing engine work.